Jun 27, 2025 Pustite sporočilo

Bimetalne žice bakra in kovar se uporabljajo kot prevodni svinčeni materiali

It is a type of bimetallic wire with oxygen-free copper in the middle and KOVAR,4J50 or 4J29 and other Kovar alloys seamlessly inserted on the outside. Special airtight packaging for precision electronics. It can be integrated with certain components (such as hybrid integrated A/D or D/A converters) into one, suitable Za aplikacije z enim čipom in več čipi z nizkimi V/I številkami, pa tudi za RF, mikrovalovno, optoelektronsko, površinsko akustično valovno in veliko moč

 

Specification and size: Outer diameter D=1MM, steel core =0.45mm (The ratio of the radius of the copper core to that of the low-expansion alloy can be any, the standard ratios are 2:1 and 3:1.) When the ratio is 3:1, the resistivity of the copper core lead is 12μω · cm .

-1

Pure copper is also known as oxygen-free high-conductivity copper (OFHC), with a resistivity of 1.72μΩ·cm, second only to silver. Its thermal conductivity is 401W(m-1K-1). From the perspective of heat transfer, it is very ideal as a Embalažna lupina in se lahko uporablja v embalaži, ki zahteva visoko toplotno prevodnost in/ali visoko električno prevodnost ., vendar je njegov koeficient toplotne ekspanzije kar 16,5 × × 10-6 k -1, kar lahko povzroči pomemben termični stres na togih podstavkih.

 

The coefficient of thermal expansion of KOVAR alloy (Fe-29Ni-17Co, Chaozhan brand numbers 4J50,4J29) is relatively close to that of Si, GaAs, Al2O3, BeO, and AIN. It has good weldability and processability and can be matched and sealed with borosilicate hard steklo . V kovinskih paketih se široko uporablja z nizko gostoto moči . Slabosti so, da ima nizko toplotno prevodnost, visoko upornost in relativno visoko gostoto .

 

Kompozitne žice bakrenega jedra za tesnjenje stekla in kovine se proizvajajo na podlagi Cu . Zunanja površina bakrenega jedra je lahko 50 zlitin (Fe -50 ni, številka Chaozhan Brand 4J50), kovarjeva zlitina (fe {{7} niy-17 co) ali 42-6} co) ali {{7-17 co) (Fe-42Ni-6Cr). Morning exhibition of expansion materials such as brand number 4J6 and 446 stainless steel (Fe-24Cr). The two are completely metallurgically bonded, featuring excellent mechanical strength, toughness and air tightness. It not only provides the Visoka električna prevodnost bakra, hkrati pa ponuja možnost tesnila ekspanzijskega materiala s steklenim plinom .

Pošlji povpraševanje

whatsapp

Telefon

E-pošta

Povpraševanje